Replacing The Seal Wash Pump - Agilent Technologies Infinity Binary Pump VL 1290 User Manual

9
Maintenance

Replacing the Seal Wash Pump

Replacing the Seal Wash Pump

When In case of wear of the seal wash pump
Parts required p/n
5042-8507
Preparations Remove the shutoff valve panel
connections from and to the seal wash pump
1
For removing the seal wash pump, press the clips (1) and
pull the pump to the front (2).
130
Description
Peristaltic Pump for Seal Wash
("Replacing the Shutoff Valve Panel"
2
Insert the pump clips to the holes in the binary pump
housing.
on page 116) and flow
Agilent 1290 Infinity Binary Pump User Manual