Agilent Technologies Infinity Binary Pump VL 1290 User Manual page 250

13
LAN Configuration
Manual Configuration
5 Use the "/" and press Enter to list the current settings.
Figure 52 Telnet - Current settings in "Using Stored" mode
6 Change the IP address (in this example 134.40.27.99) and type "/" to list
Figure 53 Telnet - Change IP settings
250
current settings.
information about the LAN interface
MAC address, initialization mode
Initialization mode is Using Stored
active TCP/IP settings
TCP/IP status - here ready
connected to PC with controller software (e.g. Agilent
ChemStation), here not connected
change of IP setting to
Initialization mode is Using Stored
active TCP/IP settings
stored TCP/IP settings in non-volatile memory
connected to PC with controller software (e.g. Agilent
ChemStation), here not connected
Agilent 1290 Infinity Binary Pump User Manual