Table of Contents
Advertisement
Instrument Signals
The following pump signals are displayed:
Flow
Pressure
Pressure Limit
Composition A:B
Context Menu
The context menu of the dashboard panel contains the following commands:
Agilent 1290 Infinity Binary Pump User Manual
Setting up the Pump with the Instrument Control Interface
The current solvent flow rate (in mL/min).
The current pump ressure (in bar, psi or MPa, see
Configuration"
on page 45).
The current maximum pressure limit.
The current solvent composition. When a solvent selection valve is fitted,
the channels are shown in the graphic.
Control
Displays the pump's Control dialog box.
Method
Displays the pump's Method Setup dialog box.
Set Error Method
Sets the method that is loaded if an error occurs to the
method that is currently available in the hardware.
Identify Device
Causes the LED on the front of the module to blink for a
few seconds.
Switch Pump On/Off
Toggles the status of the pump, on or off.
Bottle Fillings
Displays the Bottle Fillings dialog box.
Purge On/Off
Allows you to control the purging of the system.
Prime On/Off
Allows you to prime the pump heads for initially drawing
solvent.
Conditioning On/Off
Allows you to switch pump conditioning on and off. The
conditioning function is useful for removing small air
bubbles inside the pump flow path.
4
Using the Pump
"Instrument
47
Advertisement
Table of Contents
