Table of Contents
Advertisement
13
LAN Configuration
Automatic configuration with Bootp
Editing the IP address and other parameters in EditBootPSettings
1 Select Start > All Programs > Agilent BootP Service and select Edit BootP Settings.
2 When the BootP Settings screen is first opened, it shows the default settings
3 Press Edit BootP Addresses... to edit the Tab File.
4 In the Edit BootP Addresses... screen press Add... to create a new entry or
5 Leave Edit BootP Addresses... by pressing Close.
6 Exit BootP Settings by pressing OK.
Restarting the Agilent BootP Service
1 In the Windows control panel, select Administrative Tools > Services. The
2 Right-click Agilent BootP Service and select Start.
3 Close the Services and Administrative Tools screens.
246
The BootP Settings screen appears.
from installation.
Figure 47
Edit BootP Adresses screen
select an existing line from the table and press Modify... or Delete to change
the IP address, comment, subnet mask, for example, in the Tab File.
If you change the IP address, it will be necessary to power cycle the
instrument for the changes to take effect.
Services screen appears, see
Figure 46
on page 245.
Agilent 1290 Infinity Binary Pump User Manual
Advertisement
Table of Contents
