Table of Contents
Advertisement
3
Installing the Module
Flow connections to the pump
Parts required
#
1
1
1
Preparations
Pump is installed in the LC system.
Toxic, flammable and hazardous solvents, samples and reagents
WA R N I N G
The handling of solvents, samples and reagents can hold health and safety risks.
➔
➔
➔
1 Remove the front cover by pressing the snap fasteners on both sides.
36
p/n
G4220-68705
G5067-1531
When working with these substances observe appropriate safety procedures (for
example by wearing goggles, safety gloves and protective clothing) as described in
the material handling and safety data sheet supplied by the vendor, and follow good
laboratory practice.
The volume of substances should be reduced to the minimum required for the
analysis.
Do not operate the instrument in an explosive atmosphere.
Figure 8
Removing the Front Cover
Description
Other modules
Accessory kit
Solvent Cabinet Kit
Agilent 1290 Infinity Binary Pump User Manual
Advertisement
Table of Contents
