Binary pump shutdown during analysis
Error ID: 22065
The binary pump has been shut down by the control software or control
module during an analysis.
• Parameter: 0 for off, 1 for standby.
Probable cause
1
Reading the pump encoder tag failed
Error ID: 22402
Reading the pump encoder tag has failed.
• Parameter: 1 – 4 referring to pump drive
Probable cause
1
2
Writing the pump encoder tag failed
Error ID: 22405
Writing the pump encoder tag has failed.
• Parameter: 1 – 4 referring to pump drive
Probable cause
1
2
Agilent 1290 Infinity Binary Pump User Manual
Pump has been shut down.
Defect connection between encoder and
main board.
Missing or defect tag Defect connection
between tag and encoder.
Defect connection between encoder and
main board.
Defect tag Defect connection between tag
and encoder.
Error Information
Pump Error Messages
Suggested actions
Restart pump.
Suggested actions
Please contact your Agilent service
representative.
Please contact your Agilent service
representative.
Suggested actions
Please contact your Agilent service
representative.
Please contact your Agilent service
representative.
7
89