Installing The Valve Rail Kit - Agilent Technologies Infinity Binary Pump VL 1290 User Manual

Installing the Valve Rail Kit

When This rail is needed for the installation of external valves
Tools required Description
Pozidrive screwdriver #1
Parts required #
1
The rail can be installed on the left or right side of the pump. This procedure describes the
N O T E
installation on the left side and applies similarly to the right side.
1 The valve rail is fixed to the pump cover by 4 screws. The position of the
Agilent 1290 Infinity Binary Pump User Manual
p/n
5067-4634
lower screws is marked on the module cover. First tighten these screws, and
then tighten the upper screws.
Description
Valve Rail Kit
Maintenance

Installing the Valve Rail Kit

9
159