Table of Contents
Advertisement
9
Maintenance
Warnings and Cautions
Warnings and Cautions
Toxic, flammable and hazardous solvents, samples and reagents
WA R N I N G
The handling of solvents, samples and reagents can hold health and safety risks.
➔
➔
➔
Electrical shock
WA R N I N G
Repair work at the module can lead to personal injuries, e.g. shock hazard, when the
cover is opened.
➔
➔
Personal injury or damage to the product
WA R N I N G
Agilent is not responsible for any damages caused, in whole or in part, by improper
use of the products, unauthorized alterations, adjustments or modifications to the
products, failure to comply with procedures in Agilent product user guides, or use of
the products in violation of applicable laws, rules or regulations.
➔
Safety standards for external equipment
C A U T I O N
➔
112
When working with these substances observe appropriate safety procedures (for
example by wearing goggles, safety gloves and protective clothing) as described in
the material handling and safety data sheet supplied by the vendor, and follow good
laboratory practice.
The volume of substances should be reduced to the minimum required for the
analysis.
Do not operate the instrument in an explosive atmosphere.
Do not remove the cover of the module.
Only certified persons are authorized to carry out repairs inside the module.
Use your Agilent products only in the manner described in the Agilent product user
guides.
If you connect external equipment to the instrument, make sure that you only use
accessory units tested and approved according to the safety standards appropriate
for the type of external equipment.
Agilent 1290 Infinity Binary Pump User Manual
Advertisement
Table of Contents
