Two Stack Configuration
In case the autosampler thermostat is added to the system, a two-stack
configuration is recommended, which places both heavy modules (1290
Infinity pump and thermostat) at the bottom of each stack and avoids high
stacks. Some users prefer the lower height of this arrangement even without
the autosampler thermostat. A slightly longer capillary is required between
the pump and autosampler. (See
Figure 4
Agilent 1290 Infinity Binary Pump User Manual
Recommended two stack configuration for 1290 Infinity with binary pump
(front view)
Optimizing the Stack Configuration
Figure 4
on page 29 and
Installing the Module
Figure 5
on page 30).
3
29