Installation Of Bootp Service - Agilent Technologies Infinity Binary Pump VL 1290 User Manual

Installation of BootP Service

Before installing and configuring the Agilent BootP Service, be sure to have
the IP addresses of the computer and instruments on hand.
1 Log on as Administrator or other user with Administrator privileges.
2 Close all Windows programs.
3 Insert the Agilent ChemStation software DVD into the drive. If the setup
4 Open Windows Explorer.
5 Go to the BootP directory on the Agilent ChemStation DVD and double-click
6 If necessary, click the Agilent BootP Service... icon in the task bar.
7 The Welcome screen of the Agilent BootP Service Setup Wizard appears. Click
8 The End-User License Agreement screen appears. Read the terms, indicate
9 The Destination Folder selection screen appears. Install BootP to the default
10 Click Install to begin installation.
Agilent 1290 Infinity Binary Pump User Manual
program starts automatically, click Cancel to stop it.
BootPPackage.msi.
Next.
acceptance, then click Next.
folder or click Browse to choose another location. Click Next.
The default location for installation is:
C:\Program Files\Agilent\BootPService\
LAN Configuration
Automatic configuration with Bootp
13
239