Table of Contents
Advertisement
set eapol
Use this command to enable or disable EAPOL port‐based user authentication with the RADIUS
server and to set the authentication mode for one or more ports.
Syntax
set eapol [enable | disable] [auth-mode {auto | forced-auth | forced-unauth}
port-string
Parameters
enable | disable
auth‐mode
auto |
forced‐auth |
forced‐unauth
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example shows how to enable EAPOL:
C2(su)->set eapol enable
This example shows how to enable EAPOL with forced authorized mode on port fe.1.1:
C2(su)->set eapol auth-mode forced-auth
clear eapol
Use this command to globally clear the EAPOL authentication mode, or to clear settings for one or
more ports.
Syntax
clear eapol [auth-mode] [port-string]
Enables or disables EAPOL.
Specifies the authentication mode as:
•
auto ‐ Auto authorization mode. This is the default mode and will
forward frames according to the authentication state of the port. For
details on this mode, refer to Table
•
forced‐auth ‐ Forced authorized mode, which disables authentication
on the port.
•
forced‐unauth ‐ Forced unauthorized mode, which filters and discards
all frames received on the port.
Specifies the port(s) on which to set EAPOL parameters. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 7‐2.
23‐2.
fe
.1.1
SecureStack C2 Configuration Guide 23-19
set eapol
Advertisement
Table of Contents
