Enterasys SecureStack C2 C2G170-24 Configuration Manual page 360

show cos port-type
Defaults
If no parameters are specified, inbound rate limiting and flood controlinformation for all port
types is displayed.
Mode
Switch command, read‐only.
Usage
The C2 implementation provides one default port type (0) for designating available inbound rate
limiting or flood control resources. Port type 0 includes all ports.
The port type 0 IRL description is "C2 100 IRL," which indicates that this port type provides a
maximum of 100 inbound rate limiting resources per port group. The port type 0 flood control
description is "C2 3 flood‐ctrl" which indicates that this port type provides a maximum of 3 flood
control resources per port group.
Examples
This example shows inbound rate limiting information for port type 0.
C2(su)->show cos port-type irl 0
Number of resources:
irl = inbound rate limiter(s)
Index
-----
0
This example shows flood control information for port type 0.
C2(su)->show cos port-type flood-ctrl 0
Number of resources:
flood-ctrl = flood control type
Index
-----
0
11-36 Policy Classification Configuration
Port type Number of
description limiters
------------ ---------
C2 100 IRL 100
Port type Number of
description limiters
------------ ---------
C2 3 flood-ctrl 3
Supported rate types:
Kbps = kilobits per second
Supported Eligible
rate type ports
--------- -----------------
kbps ge.1.1-48
Supported rate types:
Pps = Packets per second
Supported Eligible
rate type ports
--------- ----------------
pps ge.1.1-24
Unselected
ports
-----------------
ge.1.1-4
Unselected
ports
------------
ge.1.1-24