Show Port Ratelimit Output Details - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Example
This example shows how to display the current rate limiting information for fe.2.1:
C2(su)->show port ratelimit fe.2.1
Global Ratelimiting status is disabled.
Port
Number Index
----------- -----
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
Table 12‐1 shows a detailed explanation of the command output.
Table 12-1 show port ratelimit Output Details
Output
Port Number
Index
Threshold (kB/s)
Action
Direction
Priority List
Status
Threshold
(kB/s) Action
--------- ------------
1 64 discard
2 64 discard
3 64 discard
4 64 discard
5 64 discard
6 64 discard
7 64 discard
8 64 discard
What It Displays...
Port designation. For a detailed description of possible port-string
values, refer to
Resource index for this port.
Port rate limiting threshold in kilobytes per second.
Whether or not frames not conforming to rate limiting will be discarded.
Currently rules can only be applied to inbound traffic.
802.1D (802.1p) port priority level.
Whether or not this rule is active or disabled.
Direction
--------- -----------
inbound
inbound
inbound
inbound
inbound
inbound
inbound
inbound
"Port String Syntax Used in the
SecureStack C2 Configuration Guide 12-11
show port ratelimit
Priority
List Status
--------
0 disabled
0 disabled
0 disabled
0 disabled
0 disabled
0 disabled
0 disabled
0 disabled
CLI" on page 7-2.