Set Dhcp Pool Domain-Name; Clear Dhcp Pool Domain-Name - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Mode
Switch command, read‐write.
Example
This example removes the DNS server list from the address pool "auto1."
C2(rw)->clear dhcp pool auto1 dns-server

set dhcp pool domain-name

Use this command to specify a domain name to be assigned to DHCP clients served by the address
pool being configured.
Syntax
set dhcp pool poolname domain-name domain
Parameters
poolname
domain
Defaults
None.
Mode
Switch command, read‐write.
Example
This example assigns the "mycompany.com" domain name to the address pool "auto1."
C2(rw)->set dhcp pool auto1 domain-name mycompany.com

clear dhcp pool domain-name

Use this command to remove the domain name from the address pool being configured.
Syntax
clear dhcp pool poolname domain-name
Parameters
poolname
Defaults
None.
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Specifies the domain name string. The domain name can be up to 255
characters in length.
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
set dhcp pool domain-name
SecureStack C2 Configuration Guide 16-25