Clear Policy All-Rules - Enterasys SecureStack C2 C2G170-24 Configuration Manual

clear policy all-rules

udpdestport
udpsourceport
Defaults
When applicable, data and mask must be specified for individual rules to be cleared.
Mode
Switch command, read‐write.
Examples
This example shows how to delete Ethernet II Type 1526 classification rule entries associated with
policy profile 1 from all ports
C2(su)->clear policy rule 1 ether 1526
This example shows how to remove a rule from policy profile 5 that will forward UDP frames
from source port 45:
C2(su)->clear policy rule 5 udpportsource 45 forward
clear policy all-rules
Use this command to remove all policy classification rules.
Syntax
clear policy all-rules
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to remove all administrative and policy index rules:
C2(su)->clear policy all-rules
11-14 Policy Classification Configuration
Deletes associated UDP destination port classification rule.
Deletes associated UDP source port classification rule.