Clear Rmon Capture - Enterasys SecureStack C2 C2G170-24 Configuration Manual

clear rmon capture

Mode
Switch command, read‐write.
Example
This example shows how to create RMON capture entry 1 to "listen" on channel 628:
C2(rw)->set rmon capture 1 628
clear rmon capture
Use this command to clears an RMON capture entry.
Syntax
clear rmon capture index
Parameters
index
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear RMON capture entry 1:
C2(rw)->clear rmon capture 1
15-24 RMON Configuration
Specifies the capture entry to be cleared.