Clear Spantree Lplock - Enterasys SecureStack C2 C2G170-24 Configuration Manual

clear spantree lplock

Parameters
port‐string
sid sid
Defaults
If no port‐string is specified, status is displayed for all ports.
If no SID is specified, SID 0 is assumed.
Mode
Switch command, read‐only.
Example
This example shows how to display Loop Protect lock status on ge.1.1:
C2(rw)->show spantree lplock port
The LoopProtect lock status for port
clear spantree lplock
Use this command to manually unlock a blocked port and optionally, per SID. The default state is
unlocked.
Syntax
clear spantree lplock port-string [sid sid]
Parameters
port‐string
sid sid
Defaults
If no SID is specified, SID 0 is assumed.
Mode
Switch command, read‐only.
Example
This example shows how to clear Loop Protect lock from ge.1.1:
C2(rw)->show spantree lplock port
The LoopProtect lock status for port
C2(rw)->clear spantree lplock
C2(rw)->show spantree lplock port
The LoopProtect lock status for port
9-44 Spanning Tree Configuration
(Optional) Specifies port(s) for which to display the Loop Protect lock
status.
(Optional) Specifies the specific Spanning Tree(s) for which to display
the Loop Protect lock status. Valid values are 0 ‐ 4094. If not specified,
SID 0 is assumed.
ge.
1.1
ge.
1.1
Specifies port(s) for which to clear the Loop Protect lock.
(Optional) Specifies the specific Spanning Tree(s) for which to clear the
Loop Protect lock. Valid values are 0 ‐ 4094. If not specified, SID 0 is
assumed.
ge.
1.1
ge.
1.1
ge.
1.1
ge.
1.1
ge.
1.1
, SID 0 is UNLOCKED
, SID 0 is LOCKED
, SID 0 is UNLOCKED