Show Cos Port-Resource - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Stackable switches
Hide thumbs Also See for SecureStack C2 C2G170-24:
Table of Contents

Advertisement

Usage
CoS port resources are where actual physical rate limiters are configured. This command can be 
used to create up to three different flood control limit resources for the port‐type index of 0. The 
resources are assigned to specific ports with the set cos port‐config command.
Example
This example creates a port resource broadcast rate limiter of 5 packets per second for the port 
group type index of 1.0 (group # 1 of port‐type index 0).
C2(su)->set cos port-resource flood-ctrl 1.0 broadcast rate 5

show cos port-resource

Use this command to display the configured port resources.
Syntax
show cos port-resource [irl [group-type-index [irl-index]]] | [flood-ctrl [group-
type-index]]
Parameters
irl
flood‐ctrl
group‐type‐index
irl‐index
Defaults
If irl or flood‐ctrl are not specified, all port resources are shown.
If a port group and IRL index are not specified, the IRL configuration for all resources (0‐99) for all 
configured port groups will be shown.
If a port group is not specified with the flood‐ctrl parameter, flood control resources for all 
configured port groups will be shown.
Mode
Switch command, read‐only.
Examples
This example displays the IRL resource index number 1 configuration for group 2.0. 
C2(su)->show cos port-resource irl 2.0 1
'?' after the rate value indicates an invalid rate value
Group Index Resource Type Unit
(Optional) Specifies that inbound rate limiting port resources should be 
displayed.
(Optional) Specifies that flood control port resources should be displayed.
(Optional) Specifies a port group/type index. Valid entries are in the form 
of group#.port‐type. 
Valid values for group# can range from 0 to 7. Valid values for port‐type 
can range from 0 to 1, although only port type 0 is currently supported. 
For example, port group 3 would be specified as 3.0. 
(Optional) Inbound rate limiter resource index configured for the 
specified port group. Valid values range from 0 to 99.
Rate
Rate Limit Type Action
SecureStack C2 Configuration Guide 11-29
show cos port-resource

Advertisement

Table of Contents
loading

This manual is also suitable for:

C2h124-24Securestack c2

Table of Contents