Purpose; Configuring Simple Network Time Protocol (Sntp); Show Sntp - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Example
This example enables multicast flood protection.
C2(su)->set mac unreserved-flood enable

Configuring Simple Network Time Protocol (SNTP)

Purpose

To configure the Simple Network Time Protocol (SNTP), which synchronizes device clocks in a
network.
Commands
For information about...

show sntp

set sntp client
clear sntp client
set sntp server
clear sntp server
set sntp poll-interval
clear sntp poll-interval
set sntp poll-retry
clear sntp poll-retry
set sntp poll-timeout
clear sntp poll-timeout
set timezone
show sntp
Use this command to display SNTP client settings.
Syntax
show sntp
Parameters
None.
Note: A host IP address must be configured on the C2 to support SNTP.
Configuring Simple Network Time Protocol (SNTP)
Refer to page...
SecureStack C2 Configuration Guide 14-27
14-27
14-29
14-29
14-30
14-30
14-31
14-31
14-32
14-32
14-33
14-33
14-33