Auto Print (Trans.); Auto Print (Refl.) - Toshiba B-EX6 Series Maintenance Manual

5. SYSTEM MODE

5.6.7 AUTO PRINT (TRANS.)

The factory test print is performed on the following conditions, therefore, the parameter settings and the
print density fine adjustment value are ignored.
Key functions after printing of each test pattern are as follows.
 [ENTER] key (or its substitute key):
 [CANCEL] key (or its substitute key): The display returns to the menu.
 Other keys: Invalid
<Factory test print patterns and print conditions>
Print test pattern
Issue count
Print speed
Sensor type
Print method
Issue mode
Label pitch
Print density fine adjustment value

5.6.8 AUTO PRINT (REFL.)

The factory test print is performed on the following conditions. Therefore, the parameter settings and
the print density fine adjustment value are ignored.
Key functions after printing of each test pattern are as follows.

[ENTER] key (or its substitute key):

[CANCEL] key (or its substitute key): The display returns to the menu.

Other keys: Invalid
<Factory test print patterns and print conditions>
Print test pattern
Issue count
Print speed
Sensor type
Print method
Issue mode
Label pitch
Print density fine adjustment value
Next printing is performed.
1 blank label
3-dot slant lines
Barcode
Characters
5 labels each
203 dpi 5 ips
305 dpi 5 ips
Transmissive sensor
Thermal transfer
Batch issue
76 mm
±0
Next printing is performed.
1 blank label
3-dot slant lines
Barcode
Characters
5 labels each
203 dpi 5 ips
305 dpi 5 ips
Reflective sensor
Thermal transfer
Batch issue
76 mm
±0
5-49
EM18-33031
5.6 TEST PRINT