4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
6. Secure the Cutter Unit with the M-4x8 screws.
7. Attach the Cutter Cover to the Cutter Unit with the two screws so that the tab of the Cutter Cover turns
on the Cutter Cover Open Switch.
NOTES: 1. Be careful not to pinch the cutter harness by the cutter cover.
2. Make sure that the anti-static brush is protruding from the media outlet.
Anti-static brush
4.9.4 Wiring of the Harness Ass'y
1. Pass the Harness Ass'y through the Cable Protector.
Cable Protector
Cutter Cover Open Switch
Screw
4-67
(Revision Date: Dec., 2018)
4.9 4" ROTARY CUTTER (B-EX206-R-QM-S)
M-4x8 Screw
Cutter Cover
Inside of the Cutter Cover
Harness Ass'y
EO18-33031
Tab