4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
5. Fit the Serial Connector of the Serial Interface Board into the slot from the inside, and secure it with
the two M-3x6 screws from the outside, as shown below.
6. Connect the interface cable to J6 on the Main PC board.
Serial Interface Board
7. Re-install the Side panel (L).
8. Refer to Section 5.9.3 RS-232C in 5.9 INTERFACE for the interface parameter settings.
4.7 SERIAL INTERFACE BOARD (B-EX700-RS-QM-R)
J6
4-37
(Revision Date: Mar. 1, 2017)
M-3x6 Screw
Serial Interface
Connector
M-3x6 Screw
Main PC Board
Interface Cable
EO18-33031