Toshiba B-EX6 Series Maintenance Manual page 70

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
(3) TAG
NONE

EPC C1 Gen2

(4) RF CHANNEL
AUTO

2CH

3CH

4CH

5CH

6CH

7CH

8CH

4.8.6.3 RETRY
(1) ADJ RETRY POSITION
99mm
98mm
-98mm
-99mm
(2) ISSUE RETRY LABELS
255
254
1
0
Set the channel to be used for writing data onto RFID tags.
When a channel is chosen from 2CH to 8CH, that channel will be
continuously used.
When the channel is set to AUTO, an available channel is searched in
the following order.
AUTO: 2CH  8CH  6CH  4CH  3CH  7CH  5CH  2CH
Though this setting is applicable to all models, it works effectively only
for the B-EX706-RFID-U4-R (UHF for Japan).
If writing data on a tag failed, the printer feeds the RFID tag forward or
backward for specified length, in order to retry data write. When "0" is
set for this parameter, this function and a retry are not performed.
Only the value of –3mm or less or +3mm or more becomes effective.
Set a maximum number of retries to issue an RFID tag.
When issuing an RFID tag failed, the printer prints the error pattern,
and retries to issue the tag for up to specified number of times. If
the printer does not succeed even after having retried for the max.
times, the printer stops, resulting in an error.
4-53
(Revision Date: Mar. 1, 2017)
4.8 UHF RFID KIT (B-EX706-RFID-U4-US/EU/AU-R)
EO18-33031