15. MAJOR UNIT REPLACEMENT
15.15 INTERFACE CARDS
1)
Remove the side panel (L). (Refer to Section 3.2.)
2)
Each Interface card is being held by 2 screws.
Back View
3)
After removing the 2 screws, push the card to the inside and remove the connector from the Main PCB
Board.
Expansion I/O Interface Card
Parallel Interface
Serial Interface
(Note: For GS/TS16
models, this slot is used
for WLAN Interface)
See Section 4.6 for details
Expansion I/O Interface
15-31
15.15 INTERFACE CARDS
Side View
Expansion I/O Interface Card
EM18-33031