4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
5.
Pass the ground wire through the hole in the sheet metal as shown in the photo, and secure it with
screws (PT-3x6).
6.
Pull out the interface cable from the opposite side, and pass it through the opening.
Interface Cable
7. Arrange the cables properly and secure it on the cable clamp as shown below.
Cable Guard
Cut the old cable ties and
fasten the cables together
with the interface cable with
new cable ties.
4.8 UHF RFID KIT (B-EX706-RFID-U4-US/EU/AU-R)
Ground Wire
Cable Clamp
4-43
EO18-33031
(Revision Date: Mar. 1, 2017)
Ground Wire
Screw (PT-3x6)