Toshiba B-EX6 Series Maintenance Manual page 200

10. ON LINE MODE
6c. Threshold fine
adjustment
6d. Judgment result (After
the fine adjustment)
[LEFT] key  "6c.
[ENTER] key  "2. Pause state." (Threshold setting is completed.)
[RIGHT] key  "6b.
7. Threshold setting:
7a. Judgment result (NG)
[FEED] key  "3. Media sensor selection." (Threshold is set again.)
[ENTER] key  "2. Pause state." (Threshold setting is completed.)
[RIGHT] key  "7b.
7b. Details of the r
THRESHOLD <REFL.>
1.0
( 0.0 -
Press any of the [PAUSE], [ENTER], and [CANCEL] key.
1）REFL.(PRE-PRINT)
Result: OK (Mid.)
◀Adjust
Threshold fine adjustment
Details of the r
esult." (Result and the threshold value are displayed.)
1）REFL.(PRE-PRINT)
Result: Failed (1)
×
×
Retry FEED
Details of the r
esult." (Result and the threshold value are displayed.)
1）REFL.(PRE-PRINT)
esult
Peak : 2.1V
Threshold : 1.3V
Baseline : 1.2V
◀Result
[LEFT] key: Go to "7a. Judgment"
Operation is same as 9.7.4
THRESHOLD LEVEL.
V
4.0 V)
Threshol
Baseline
Detail▶
." (The threshold value is fine adjusted again.)
Threshol
Baseline
Detail▶
10-12
EM18-33031
10.6 MANUAL THRESHOLD SETTING