Country; Tag - Toshiba B-EX6 Series Maintenance Manual

5. SYSTEM MODE
5.10.2.2

COUNTRY

When the module type is set to "U4", the country code of the currently installed module is displayed.
If the module type is set to other than "U4", "INVALID" is displayed.
It is possible to change the country setting only when the module type is set to "U4" and the actually
installed module is US or EU or AU. However, this menu is password-protected because changing the
country setting causes the output frequency to change.
The following message is displayed depending on the module type setting, the mounted module type,
and the module mount condition.
Module Type
parameter
NONE No module installed.
U4 No module installed.
B-EX706-RFID-U4-R
B-EX706-RFID-U4-EU-R
B-EX706-RFID-U4-US-R
B-EX706-RFID-U4-AU-R
*1: Selectable country codes differ depending on the RFID module type. Multiple country codes may be
displayed when setting a country code, but be sure to select the country where the RFID module is used.
Setting a different country code is prohibited.

5.10.2.3 TAG

Selectable tag types vary according to the module setting.
The number in the table indicates the scroll line number.
NONE
I-Code
Tag-It
C220
ISO15693
C210
C240
C320
EPC C1 Gen2
Module type and status
NONE H1
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9
NONE
No RFID Module
No country Need Setting for use
setting [ENTER] for Setting
H2 U2/U4
1 1
2
2
5-69
EM18-33031
5.10 RFID
Message