4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4. Insert the connector of Rewinder Harness, disconnected from the Rewinder PC Board in Step 2, into the
hole in the main frame.
Hole
Rewinder Harness
5. Pull out the Rewinder Harness from the opposite side, and re-connect it to CN1 on the Rewinder PC
Board.
CN1
4.3 PEEL-OFF MODULE (B-EX906-H-QM-R)
4-16
EO18-33031
Tabs of Blind Plate
(→ Step 7)
Hole
Rewinder Harness
Rewinder PC Board