Toshiba B-EX6 Series Maintenance Manual page 25

EO18-33031
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.1 DISC CUTTER (B-EX206-QM-R)
6. Remove 2 screws and Cutter Cover
Plastic Head Screw
Plastic Head Screw
Cutter Cover
7. Put the Cord Bush onto the Harness Ass'y in the orientation as shown below.
Cord Bush
8. Attach the Cable Clamp to the printer base.
Fasten the Harness Ass'y with the Cable Clamp.
Harness Ass'y
Cable Clamp
Printer Base Cable Clamp
NOTE: Make sure the wires will not touch or obstruct any moving parts.
4- 8