Toshiba B-EX6 Series Maintenance Manual page 46

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
5. Fit the Wireless LAN card slot into the slot from the inside, and secure it with the two M-3x6 screws
from the outside, as shown below.
6. Attach the Antenna Cover to the printer back with the two M-3x6 screws, as shown below.
Antenna Cover
7. Connect the Interface Cable to J6 on the Main PC board.
4.5 Wireless LAN BOARD (B-EX700-WLAN2-QM-R)
J6
4-29
EO18-33031
M-3x6 Screw
Wireless LAN Card Slot
M-3x6 Screw
M-3x6 Screw
M-3x6 Screw
Main PC Board
Interface Cable