EO18-33031
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.1 DISC CUTTER (B-EX206-QM-R)
9. Place the hook at the left side of the Cutter Unit on the cut in the printer main frame.
Cut
Hook
Cutter Unit
10. Secure the right side of the Cutter Unit with the ST-3x6 screw.
ST-3x6 Screw
11. Secure the bottom of the Cutter Unit with the two M-4x6 screws.
Cutter Unit
M-4x6 Screw
4- 9