Toshiba B-EX6 Series Maintenance Manual page 203

10. ON LINE MODE
3: Transmissive sensor (when using
preprinted labels)
4: Reflective sensor (when using a
manual threshold value)
6) Press the [MODE] key.
→ The system mode menu is displayed.
7) Turn off the power, and back to on.
→ The printer is placed in the online state.
8) Send an Issue Command to make the printer print.
→ If a paper jam occurs or the media does not stop at the print start position, retry the threshold setting.
No setting is necessary.
No setting is necessary.
10-15
EM18-33031
10.6 MANUAL THRESHOLD SETTING