Toshiba B-EX6 Series Maintenance Manual page 22

EO18-33031
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.1 DISC CUTTER (B-EX206-QM-R)
4.1.1 Removing the Covers
1. Turn the printer power off and disconnect the Power Cord.
2. Remove the three B-4x5 screws from the Side Panel (L).
3. Slide the Side Panel (L) backward, and raise it to remove from the printer.
B-4x5 Screw
Side Panel (L)
B-4x5 Screw
4. Fully open the Top Cover.
Top Cover
5. Release the tab on the right end by pushing it, then remove the Front Panel (Right).
Tab
Front Panel (Right)
4- 5