4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
APPLICABLE MODEL
(1) This optional device is intended for the following models:
B-EX6T Series
Be careful not to install this product in any other models than above.
(2) The countries where the use of this device is allowed are as follows:
Model Name
B-EX706-RFID-U4-US-R
B-EX706-RFID-U4-EU-R
B-EX706-RFID-U4-AU-R
PACKING LIST
All the following parts are supplied with the kit. Make sure you have all items shown below.
If any part is missing, please contact your TOSHIBA TEC sales agent.
RFID Module
Bush (1 pc)
Shield label
There are three types depending on the antenna
mounting position
F
C
R
Frequency Band
UHF 902.75-927.25MHz
UHF 920.9-923.3MHz
UHF 920.625-924.375MHz
UHF 869.85MHz
UHF 918 – 926MHz
Cable ties (2 pcs)
4-39
4.8 UHF RFID KIT (B-EX706-RFID-U4-US/EU/AU-R)
Applicable Countries
PT-3x6 screw (1pc)
Installation Manual
(1 copy)
U4-US-R only
RFID media guide
RFID module harness
EO18-33031
(Revision Date: Mar. 1, 2017)
USA
Korea
China
EU+EFTA
AU
FCC ID Sticker (1 pc) for
FCC ID : BJIOH0007
IC ID : 1004C-MS0001