Toshiba B-EX6 Series Maintenance Manual page 81

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
3. Insert the connector of the Harness Ass'y into the hole in the Main Frame, then fit the Cord Bush which
was put onto the Harness Ass'y in Step 1 into the hole. Be sure to route the harness inside the hook.
NOTE: Make sure the wires will not touch or obstruct any moving parts.
4. Place the Cutter Drive Unit under the Platen Holder Block and secure it with the three M-4x8 screws.
M-4x8 Screw
Main Frame
Bush
Hook
Harness Ass'y
4-64
(Revision Date: Jan., 2019)
4.9 4" ROTARY CUTTER (B-EX206-R-QM-S)
Bush
Hook
Platen Holder Block
M-4x8 Screw
EO18-33031
Main Frame
Hole
Harness Ass'y