Toshiba B-EX6 Series Maintenance Manual page 171

5. SYSTEM MODE
ENTER KEY TEST
END DISPLAY
NOTES:
1. If a key other than designated is pressed, the printer waits until the designated key is pressed. (The test
does not proceed to the next.)
2. If the key test does not proceed to the next test even after the designated key is pressed, the key may
be broken. In this case, turn off the printer.
Press the [ENTER] key.
Press the [ENTER] or [CANCEL] key to return
to the upper-level menu.
5-85
EM18-33031
5.13 FACTORY TEST