Toshiba B-EX6 Series Maintenance Manual page 83

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33031
(Revision Date: Jan., 2019)
4.9 4" ROTARY CUTTER (B-EX206-R-QM-S)
4. Connect the four harnesses of the Cutter Unit to J1, J2, J3, and J4 on the Cutter Drive Unit.
J3
J4
Cutter Unit
J2
J1
Cutter Drive Unit
5. Place the hook at the left side of the Cutter Unit on the cut in the printer main frame.
Fit the tab of the Cutter Drive Unit into the slit in the Cutter Unit.
Cut
Cut
Hook
Fit the tab into the slit.
Place the hook on the cut.
4-66