15-8.Double Feed Control - Minolta CF1501 Service Manual

15-8. Double Feed Control
• Double feed control is provided to reduce paper misfeed caused by double feed.
• If the second sheet of paper reaches the Double Feed Sensor after the first one has
been taken up, the copier delays the paper take-up sequence to provide an adequate
interval between the sheets of paper.
Controlled Part
PC13
Paper Take-
Up Roll
Paper
Control Signal Blocked
PJ5I-8B
M-60
Synchronizing Roller
1st Drawer Double Feed
Sensor (PC13)
4004M545AA
Unblocked
H L
WIRING DIAGRAM
8-C