22. OTHER MECHANISMS
22-1.
Memory Backup
• IC5 (RAM) connected to the MSC Board stores the settings and adjustments made, and
counter values entered using the Tech. Rep. Mode.
• IC5 (RAM) has a built-in backup memory.
NOTE
• When the MSC Board is to be replaced with a new one, use care not to replace IC5
(RAM) together with the board.
22-2.
Flash Memory
• Flash memory is used on the MSC Board for updating data when upgrading software.
• Insert a memory card, in which data has previously been written, into the socket on the
MSC Board and perform the updating procedure. This rewrites the data.
NOTE
• For details, refer to DIS/REASSEMBLY, ADJUSTMENT.
Slot in which memory card is inserted
MSC Board (PWB-H)
M-96
4004M061AA