Setting In The Tech. Rep. Mode; Machine Adjust - Minolta CF1501 Service Manual

4-4.

Setting in the Tech. Rep. Mode

(1)

Machine Adjust

• These functions are used to make the various mechanical adjustments of the copier.
NOTE
• For details, see DIS/REASSEMBLY, ADJUSTMENT or Option service manual.
Touch Panel
Display
Fuser Nip Produces a sample copy for the check of the Fusing Roller nip width.
Fuser Temp. Set the temperature for fusing temperature control according to the
operating environment and the type of paper used.
Fuser Speed Adjust the fusing speed.
Org. Detect Automatically adjusts the threshold level of the Original Size Detect-
Sensor ing Sensor.
PRT Area Displays the print area adjustment screen.
Top Margin Paper Send Position
Vary the paper sending timing to adjust the image position in the sub-
scanning direction.
2nd Transfer Timing
Vary the second transfer timing to adjust the image transfer timing in
the sub-scanning direction.
Left Margin Adjust the image position for each paper source by varying the print
start position of the printer in the main scanning direction.
Dup. Left Margin Adjust the image position for each paper source in the 2-Sided Mode
by varying the print start of the printer in the main scanning direction.
IR Area Left Image
Adjust the image position by varying the image reading position of the
IR in the main scanning direction.
Top Image
Adjust the image position by varying the image reading position of the
IR in the sub scanning direction.
CD-Mag.
Adjust the zoom ratio in the crosswise direction by varying the num-
ber of pixels to be read by the CCD.
FD-Mag.
Adjust the zoom ratio in the lengthwise direction by varying the scan
speed of the Scanner.
Paper Loop Set the length of the loop to be formed in paper before the Synchro-
nizing Rollers.
Setting
S-20