13-1.Control Of Detection Of New Imaging Unit; 13-2.Imaging Unit Drive Mechanism - Minolta CF1501 Service Manual

13-1. Control of Detection of New Imaging Unit
Each Imaging Unit is provided with EEPROM Board 2 that detects whether a new Imaging
Unit is installed.
New Imaging Unit Detection Timing
Operations when no new Imaging Units are detected:
Transfer Roller Transfer Belt
retraction cleaning
Operations when a new Imaging Unit is detected:
Transfer Roller Transfer Belt
retraction cleaning
13-2. Imaging Unit Drive Mechanism
• Drive for each Sleeve/Magnet Roller is transmitted via the corresponding Developing
Clutch from the corresponding Imaging Unit Motor.
Developing Clutch Y/M/C/Bk
(CL11/12/13/14)
Toner Conveying Coils
Power Switch is turned ON
ATVC
adjustment
ATDC adjustment
Imaging Unit Motor Y/M/C/Bk
(M15/16/17/18)
Sleeve/Magnet Roller
M-43
Front Door is closed
Image
stabilization
ATVC
adjustment
PC Drum
Image
stabilization
4004M070CA
Spent Toner
Conveying Coil
4004M556AA