(3)
Removal of the IR PRIF Board
14. Pull out the Image Processing Unit.
4004D013AA
15. Remove 11 screws and the Image Processing
Board.
4004D014AA
NOTE
• At reinstallation, make sure that the Image Pro-
cessing Board is properly connected to the IR
PRIF Board.
4004D194AA
1. Pull out the Image Processing Board Unit.
D-6 (steps 1 through 14)
2. Remove five screws and the IR PRIF Board.
4004D195AA
NOTE
• At reinstallation, make sure that the IR PRIF Board
is properly connected to the Image Processing
Board.
4004D196AA
D-9