Cleaning Of The Paper Dust Remover; Cleaning Of The Transfer Belt Unit - Minolta CF1501 Service Manual

(4)

Cleaning of the Paper Dust Remover

(5)

Cleaning of the Transfer Belt Unit

NOTES
• If any solvent is to be used, select one from among the following:
IPA, ethyl alcohol, PPC Cleaner, and Solmix AP-7.
• When the solvent has been used for cleaning, make 28 or more copies using A3 blank
sheets of paper to remove image noise.
1. Open the Right Door.
2. Remove the Paper Dust Remover.
4004D206AB
3. Using a brush, whisk dust off the Paper Dust
Remover.
4004D207AA
1. Remove the Transfer Belt Unit.
Unit Replacement Manual
2. Wipe the surface of the Transfer Belt with a dry
cloth.
NOTES
• If the dry cloth is not effective in removing dirt,
dampen it with alcohol.
4004D228AA
• Do not use a cloth wet with water.
D-39