Prt Max Density; Prt Highlight - Minolta CF1501 Service Manual

(18) PRT Max Density

This adjustment must be made in the following case:
• An image quality problem is not corrected even after Gradation Adjust has been run.
Adjustment Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch these keys in this order: "Image Adjust" → "PRT Max Density."
3. Select the color to be adjusted.
4. Press the Clear key to clear the current setting.
5. Enter the new setting from the 10-Key Pad.
✽ Use the Access key to select the sign of + or -.
6. When the adjustment has been made, touch "MENU" to go back to the "Image Adjust"
menu screen.
7. Touch "Stabilizer."
8. Select "Stabilizer Mode."
9. Press the Start key to validate the adjustment value.

(19) PRT Highlight

This adjustment must be made in the following case:
• An image quality problem is not corrected even after Gradation Adjust has been run.
Adjustment Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch these keys in this order: "Image Adjust" → "PRT Highlight."
3. Select the color to be adjusted.
4. Press the Clear key to clear the current setting.
5. Enter the new setting from the 10-Key Pad.
✽ Use the Access key to select the sign of + or -.
6. When the adjustment has been made, touch "MENU" to go back to the "Image Adjust"
menu screen.
7. Touch "Stabilizer."
8. Select "Stabilizer Mode."
9. Press the Start key to validate the adjustment value.
D-88