Removal Of The Toner Hopper Unit - Minolta CF1501 Service Manual

(1)

Removal of the Toner Hopper Unit

NOTE
• Whenever the Imaging Unit has been slid out of the copier, be sure to cover it with the
light blocking bag (black) or light blocking cloth for packing purposes and place it in a
dark place. Avoid leaving it to stand for a long time.
1. Remove the Paper Output Cover.
2. Open the Front Door.
3. Remove the Toner Supply Door.
4. Remove the Hopper Left Cover.
5. Slide out the Imaging Unit (C/M/Y/Bk).
Unit Replacement Manual
NOTES
• After the Imaging Unit has been pulled out, place the Imaging Unit lock lever back into
the locked position.
• When sliding the Imaging Unit back in, make sure that the shutter is opened if the Imag-
ing Unit Lower Cover is not to be used.
6. Remove two screws and the Right Front Cover.
4004D043AA
7. Remove two screws and the Front Door Switch
Cover.
4004D044AA
8. Disconnect three terminals.
✽ Terminals: Blue, white, and green from top down
4004D045AA
D-21