Cleaning Of The Fusing Entrance Guide Plate; Removal Of The Imaging Unit Motor C/M/Y/Bk - Minolta CF1501 Service Manual

(8)

Cleaning of the Fusing Entrance Guide Plate

(9)

Removal of the Imaging Unit Motor C/M/Y/Bk

NOTE
• Whenever the Imaging Unit has been slid out of the copier, be sure to cover it with the
light blocking bag (black) or light blocking cloth for packing purposes and place it in a
dark place. Avoid leaving it to stand for a long time.
1. Remove the Rear Cover.
2. Open the Upper Right Door.
3. Remove the Rear Upper Cover.
4. Open the Right Door.
5. Remove the Rear Right Cover.
6. Remove the Ozone Filter.
7. Open the Left Door.
8. Remove the Waste Toner Bottle.
9. Remove the Rear Left Cover.
3. Wipe the areas around the Waste Toner Collect-
ing Port clean of spilled toner and dirt using a soft
cloth dampened with water or alcohol.
4004D222AB
1. Remove the Fusing Unit.
Unit Replacement Manual
2. Wipe the Fusing Entrance Guide Plate clean of
dirt using a waste cloth dampened with alcohol.
4004D208AA
10. Remove six screws and the MSC Cover.
4004D052AB
D-41