Remounting Ram Ic (Ic5 - Minolta CF1501 Service Manual

5-4.

REMOUNTING RAM IC (IC5)

NOTE
• If the MSC Board has replaced, be sure to remount RAM IC from the old to new board.
• If the MSC Board has been replaced and RAM IC is not to be remounted, be sure to
record all data of User's Choice and Tech. Rep. Choice functions and make entries again
of these numeric values. Note that the RAM IC contains no data in this case.
1. Remove the MSC Board.
2. Remove RAM IC from the new MSC Board.
3. Remove RAM IC from the old MSC Board and remount it onto the new MSC Board.
A
NOTE
• Note the alignment notch (A) on RAM IC when
mounting it.
4002D255AB
D-97
4002D225AA