(1)
Adjustment of the 2nd/3rd Mirrors Carriage Assy for Parallel Alignment
a
b
Adjusting Screw
NOTE
• When installing the Scanner Positioning Jigs, be
sure to fit the tabs on the jigs into the holes at the
front and rear ends of the frame.
4004D220AC
5. Press the Scanner Assy and 2nd/3rd Mirrors Car-
riage Assy tightly up against the Scanner Posi-
tioning Jigs.
4004D522AA
6. Tighten the two Scanner Positioning Screws.
4004D224AA
1. Remove the Original Glass.
2. Loosen one screw that secures the adjusting
plate.
4002D235AB
3. Turn the adjusting screw as necessary.
4002D236AA
D-91