(26) Removal of the Temperature/Humidity Sensor
(27) Removal of the Toner Supply Door Sensor
(28) Removal of the Manual Feed Paper Take-Up Sensor
1. Remove the Rear Right Cover.
2. Remove the Manual Bypass Unit.
D-51
3. Remove the ground plate.
D-50
1. Remove the Synchronizing Roller entrance
guide.
D-53 (steps 1 and 2)
2. Remove one screw, two washers, and the cover.
4004D097AA
3. Remove one screw, unplug one connector, and
remove the Temperature/Humidity Sensor.
4004D098AB
1. Remove the Toner Hopper.
D-21
2. Unplug one connector.
3. Remove the sensor fixing bracket and Toner
Supply Door Sensor.
4004D131AB
4. Unplug one connector.
5. Remove the sensor fixing bracket and Manual
Feed Paper Take-Up Sensor.
4004D132AA
D-54