Org. Detect Sensor - Minolta CF1501 Service Manual

(16) Org. Detect Sensor

This adjustment must be made in any of the following cases:
• The Original Size Detecting Sensor has been replaced.
• The optional Original Size Detecting Sensors have been added.
• The copier fails to detect the size of the original correctly.
Adjustment Procedure
1. Place a blank sheet of A3 paper on the Original Glass and lower the Original Cover.
2. Call the Tech. Rep. Mode to the screen.
3. Touch these keys in this order: "Machine Adjust" → "Org. Detect Sensor."
4. Press the Start key.
If the adjustment has been successfully made, it completes the adjustment procedure.
If the adjustment has turned out to be unsuccessful, check the optional Original Size
Detecting Sensors for correct installation and change the defective sensor or harness.
D-86